Strap Installation
Integrated Strap Guide
Swap the original MoonSwatch Velcro strap for a clean, integrated look in just a few minutes.
What You’ll Need
- Omega x Swatch Speedmaster MoonSwatch
- Perpetual Straps Integrated Rubber Strap
- Spring Bar Tool (with small fork tip)
- Soft Cloth (to protect the acrylic crystal)
Don’t have a spring bar tool yet?
Shop our Keychain Spring Bar Tool
Need a soft cloth?
Shop our Signature Cloth
Installation Video
To expand, tap the full-screen icon.
Step-by-Step Overview
1. Prepare your workspace
Place the watch face-down on a soft cloth or pad to protect the caseback and crystal from scratches.
2. Remove the original Velcro strap
Use the forked end of your spring bar tool to gently compress the spring bar between the lugs.
Carefully release one side of the strap, then repeat on the other side. Set the original strap aside.
3. Position your new strap
Insert the spring bars into the ends of your Perpetual Straps band.
Line each strap end up between the lugs so the spring bar tips are aligned with the lug holes.
4. Click into place
Compress one end of the spring bar with the forked tool, guide it between the lugs, and align the tip with the lug hole.
Slowly release pressure until you feel or hear a small “click.” Repeat for the other side, then lightly tug the strap to confirm both spring bars are fully seated.
5. Final fit check
Put the watch on your wrist, confirm the strap sits flush with the case, and adjust the sizing holes until the fit feels secure and comfortable.
CTS Strap Guide
Swap out your traditional watch strap or bracelet for one that fits your wrist perfectly.
Contents List
- FKM Strap (2)
- Leaf Spring Deployant Clasp
- Spring Bars (for clasp)
- Single Edge Utility Blade
Prior to Installation
- We advise placing your watch on a soft surface, such a microfiber cloth.
- For a more precise cut, we advise using the Single Edge Utility Blade that is included.
- To decompress the spring bars on the clasp, you will need a single pin or spring bar tool.
- You will also need your watch, with the original band removed.
Strap Sizing
- Install the uncut FKM Strap on both sides of your watch, excluding the Leaf Spring Deployant Clasp.
- Grip the top of the Single Edge Utility Blade with both hands, using your thumb and index fingers for support, and press straight down once it is in position along the appropriate section line.
- We advise cutting one section at a time and then connecting the FKM Strap to the Leaf Spring Deployant Clasp to determine the ideal size.
- The primary objective would be to cut just enough sections to allow for the micro adjustment function of the clasp and ensure that your watch fits properly centered on your wrist.
Troubleshooting & Tips
- Spring bar won’t click in:
Make sure the bar is centered between the lugs and the tip is directly over the lug hole before releasing pressure. - Strap feels too tight or too loose:
Try a different sizing hole first. If you’re still not happy with the fit, reach out and we’ll help with sizing advice. - Worried about scratches?
Always work slowly, with the watch on a soft cloth. Never force the spring bar, if something feels stuck, reset your position and try again.
Need Help?
If you’re unsure about any step or don’t feel comfortable using a spring bar tool, a local watchmaker or jeweler can install the strap for you in just a few minutes.
Still have questions?
Important Notice
Strap installation is done at your own risk. Improper use of tools or spring bars can result in damage to your watch, strap, or other property. If you are not confident installing the strap yourself, we strongly recommend having it installed by a professional watchmaker or jeweler.
Perpetual Straps is an independent company and is not affiliated with, authorized by, or endorsed by Omega, Swatch, or the Swatch Group. All trademarks are the property of their respective owners.